Simply brilliant.
An angle polisher is only as good as the material that you apply with it. And the best polishing agents are not much good without first-class polishing equipment. The FEIN polishing sets offer both: The FEIN WPO 13-15 E and nano polishing agents. You are able to reach brilliant results – even commercially.
More performance, less weight.
The FEIN WPO 13-15 E does not get weak at too great pressure forces. HIGH-POWER MOTOR and two-stage transmission provide a torque that is known otherwise only from large polishing machines. And that at a weight of only 2.4 kg.
Work without interruption.
With the FEIN WPO 13-15 E there is no overheating even during non-stop operation. The gear head keeps cool. That is why an often bothersome overload switch can be done without just as cost-intensive work interruptions. And also speed fluctuations under load are a thing of the past.
Perfect starting speed.
The FEIN WPO 13-15 E always starts at the lowest speed of 200 rpm. Splattering of the polishing agent is thereby practically ruled out. The same goes for uncontrolled acceleration and resulting holograms on the lacquers.
Perfect all-round treatment.
High-quality lacquered surfaces require the perfect all-round treatment. So that everything runs really smooth, we now have the FEIN polishing sets for the enamel varnish of new and used vehicles, including the new FEIN angle polisher WPO 13-15 E.
Heavily weathered varnishes / orange peel
First polish the lacquer with the lambskin and the FEIN NANO polishing agent. Then polish to a shine with the orange polishing sponge. Finally seal the polish by applying the FEIN lacquer varnish with the white polishing sponge.
Minor paint repair
Repaired rock pittings, lacquer inclusions, and minor lacquer runs are removed with the sanding discs and then polished up. For wetting use the cube sponge.
Light weathering
Slightly weathered lacquers are polished with the orange polishing sponge and FEIN NANO polishing agent. After that apply FEIN NANO lacquer varnish with the white polishing sponge. The result is impressive.
Removing holograms
Particularly dark colours are prone to holograms; blooms from polishing also appear on other colours. The wafer sponge is simply optimal for polishing down using the FEIN NANO polishing agent. Afterwards apply FEIN NANO lacquer varnish with the white polishing sponge and the surface is perfect.
FEIN tips for polishing high-quality lacquer surfaces
A perfect fi nish can be attained by using FEIN spraying wax: It ensures brilliant shine and removes polishing agent residues from plastic parts as well. After using, clean the polishing sponges and lambskins with the cleaning brush. This removes dirt and polishing agent residues reliably.
One of the lightest angle polishers in this class.
At only 2.4 kg it is one of the lightest angle polishers in this class – and thereby also features an optimal power-weight ratio. Used in combination with the highquality polishing agents made with nanoparticles it ensures a brilliant sheen also on the most modern high-tech lacquers.
FEIN New vehicle polishing set:
Specially compiled for blend-in repairs or young used cars with scratch-resistant finishes and for use with nano polishing agents
Order reference 7 221 18 50 01 0
| 1 FEIN angle polisher WPO 13-15 E
|
| 1 Support plate with Velcro attachment, Ø 150 mm
|
| 1 Polishing sponge Ø 150 mm, medium
|
| 1 Polishing sponge, orange, Ø 150 mm
|
| 1 Wafer sponge Ø 150 mm
|
| 1 NANO polishing agent 250 ml
|
| 1 NANO lacquer varnish 250 ml
|
| 1 Spraying wax 100 ml
|
| 1 Microfibre cloth
|
| 1 Cleaning brush
|
FEIN Used vehicle polishing set:
The set is compiled for all used vehicles for lacquer treatment
Order reference 7 221 18 51 01 0
| 1 FEIN angle polisher WPO 13-15 E
|
| 1 Support plate with Velcro attachment, Ø 150 mm
|
| 1 Polishing sponge Ø 150 mm, medium
|
| 1 Polishing sponge, orange, Ø 150 mm
|
| 1 Wafer sponge Ø 150 mm
|
| 1 Lambskin Ø 150 mm
|
| 1 Sheet sanding disc (53 pcs., 2800 grain)
|
| 1 Hand sanding block
|
| 1 Moisturizing cubel
|
| 1 NANO polishing agent 250 ml
|
| 1 NANO lacquer varnish 250 ml
|
| 1 Spraying wax 100 ml
|
| 1 Microfibre cloth
|
| 1 Cleaning brush
|
New vehicle lacquer set
Content in plastic case: 1 application matrix, 1 support plate with Velcro attachment, Ø 150 mm, 1 polishing sponge Ø 150 mm, medium, 1 polishing sponge, orange, Ø 150 mm, 1 wafer sponge Ø 150 mm, 1 NANO polishing agent 250 ml, 1 NANO lacquer varnish 250 ml, 1 spraying wax 100 ml, 1 microfibre cloth, 1 cleaning brush
Order reference 6 37 23 028 02 0
Used vehicle lacquer set
Content in plastic case: 1 application matrix, 1 support plate with Velcro attachment, Ø 150 mm, 1 polishing sponge Ø 150 mm, medium, 1 polishing sponge, orange, Ø 150 mm, 1 wafer sponge Ø 150 mm, 1 lambskin Ø 150 mm, 1 sheet sanding disc (53 pcs., 2800 grain), 1 hand sanding block, 1 moisturizing cube, 1 NANO polishing agent 250 ml, 1 NANO lacquer varnish 250 ml; 1 spraying wax 100 ml, 1 microfi bre cloth, 1 cleaning brush
Order reference 6 37 23 028 03 0
© Copyright C. & E. FEIN GMBH 2007-2011 | Imprint
FEIN Power Tools Pty. Ltd. | Unit 7/55 – 61 Pine Road | Yennora N.S.W. 2161 | Telephone: +61 2 9892 1533 | E-mail: sales@fein.com.au